Designer Flooring Finishes
Metallic & Decorative Epoxy in Rochester, WA
Unique, flowing, pearlescent finishes for retail spaces, man caves, and modern interiors.
Stunning Metallic Floor Finishes in Rochester
For homeowners and businesses seeking breathtaking visual impact, metallic epoxy coatings combine translucent resin with pearlescent metallic pigments. As the material cures, natural convection currents create iridescent swirls, deep marbling, and three-dimensional depth that mimics polished marble, flowing lava, or ocean currents.
Service Areas & Local Coverage
We install custom metallic and decorative epoxy systems throughout Rochester, Grand Mound, Centralia, Chehalis, Tenino, and South Thurston County. Our artisans are fully licensed, bonded, and insured, delivering stunning one-of-a-kind showroom floors. View local coverage & municipal permit guidelines →
What to look for in Metallic & Decorative Epoxy
Custom Artistic Design
Every floor is hand-manipulated with denatured alcohol and air blowers for a completely unique artisan pattern.
Glass-Like Reflectivity
High-gloss mirror finish dramatically enhances interior ambient lighting and aesthetic luxury.
The installation process, step by step
Every floor follows the same sequence. The prep stages are where the outcome is actually decided — the coating itself is the last and least difficult part.
- Moisture vapor testing. The slab is tested for moisture vapor emission before any product is selected. A high reading changes which primer is specified; it does not simply get coated over.
- Mechanical diamond grinding. Planetary grinders with HEPA dust extraction open the concrete to a CSP-2 or CSP-3 profile. No acid etching, which cannot produce a reliable profile on a hard-troweled slab.
- Crack and spall repair. Cracks are routed out and filled with fast-setting polyurea; spalled areas are rebuilt. Repairs are sanded flush so they do not show through the finish.
- Primer coat. A penetrating primer — moisture-tolerant where testing calls for it — keys into the ground profile and establishes the bond for everything above it.
- Base coat and broadcast. 100% solids epoxy is applied and, on flake systems, vinyl chips are broadcast to refusal and the excess scraped back once cured.
- Topcoat. A UV-stable polyaspartic or urethane clear coat provides the wear surface, chemical resistance and the final sheen level.
How long it takes and when you can use the floor
| Stage | Typical timing |
|---|---|
| Grinding, repair and prep | Day 1 |
| Primer and base coat | Day 1–2 |
| Topcoat | Day 2 |
| Light foot traffic | Typically 12–24 hours after topcoat |
| Vehicle traffic | About 72 hours (standard epoxy); less on polyaspartic systems |
Cure times are temperature dependent. In an unheated building during a Pacific Northwest winter, slab temperature — not air temperature — governs the schedule, and these windows extend.
What it costs in the Rochester area
Professional systems in the South Sound generally run $5.50 to $8.50 per square foot for a complete multi-layer build. The spread comes down to slab condition and the system specified, not just floor size.
| Project | Approximate size | Typical range |
|---|---|---|
| Single-car garage | 250–300 sq ft | $1,400–$2,400 |
| Two-car garage | 400–500 sq ft | $2,200–$3,800 |
| Three-car garage or shop | 650–800 sq ft | $3,600–$6,200 |
Costs move upward when the slab needs significant crack or spall repair, when an existing failed coating has to be removed, when moisture readings require a vapor-barrier base coat, or when a metallic or multi-color decorative finish is specified. They are not reduced by skipping grinding or moisture testing — that is where a cheap bid usually finds its savings, and it is also why those floors fail.
Ranges are regional estimates for planning purposes, not a quote. Pricing is confirmed after the slab is inspected and measured.
Epoxy, polyaspartic, and big-box DIY kits compared
| 100% solids epoxy | Polyaspartic | Big-box DIY kit | |
|---|---|---|---|
| Solids content | 100% | Typically 85–100% | About 30–40% |
| Surface prep required | Diamond grinding | Diamond grinding | Acid etch (inadequate) |
| UV stability | Ambers over time | UV stable | Poor |
| Cure speed | Slower; temperature sensitive | Fast; cures at low temperatures | Fast but thin |
| Typical service life | 15–25+ years | 15–25+ years | Often 1–2 years |
Most professional floors use both: an epoxy base coat for build and adhesion, with a polyaspartic topcoat for UV stability and fast return to service. The DIY column is the reason so many garage floors in this region are on their second or third coating — a 30–40% solids film over an acid-etched slab has very little to hold onto, and hot tires lift it first.
Maintenance and what the warranty covers
A properly installed resin floor needs very little: dust mop or blow out grit, damp mop with a pH-neutral cleaner, and wipe up automotive fluids when they happen rather than letting them sit. Avoid citrus or vinegar-based cleaners, which dull the topcoat over time, and use a plastic blade rather than steel if you have to scrape something off.
Warranty coverage should be provided in writing with the estimate and should state plainly what it covers — typically adhesion and topcoat performance — along with what voids it. Ask before signing rather than after.
Common questions
Is every metallic floor different?
Yes, and that is inherent to the system. Metallic pigments are moved with the resin during installation, so the veining and depth pattern cannot be repeated exactly. Samples establish the color direction and general character, not an exact reproduction.
Is a metallic floor slippery?
Polished metallic resin has a smooth, glass-like finish, so a clear anti-slip additive is recommended for any area that gets wet — entryways especially. It is included in the topcoat without changing the appearance.
Does a metallic floor cost more than a flake floor?
Generally yes. The prep is identical, but metallic systems take more installation labor and more expensive pigments, and the artistic work cannot be rushed.
Get an Exact Quote for Your Project
Get an upfront, transparent estimate and schedule a free on-site concrete evaluation with our team.
- Moisture Vapor Testing: Evaluated for hydrostatic emissions before primer application.
- Diamond Mechanical Grinding: CSP-2/CSP-3 concrete profiling with HEPA containment.
- Commercial Polyaspartic: 100% UV-stable topcoats with zero hot-tire pickup.
Prefer to speak with an estimator? Call (360) 858-6600.
Request a Flooring Quote
Fast pricing with zero pressure.
Request a Metallic & Decorative Epoxy estimate
Inquire about custom metallic epoxy options.
Free, no-obligation estimate.